CSIRX_SoftReset Struct Reference

Detailed Description

CSI2 Slave Controller Individual Soft Reset for Front and Protocol blocks. Writing to these registers will cause a single cycle pulse to be applied to the soft reset signals. Soft reset must only be applied when the associated clocks are running. These are used to recover from error conditions and should not be required during normal operation.

Data Fields
uint8_t	protocol
uint8_t	front

Field Documentation

protocol

uint8_t CSIRX_SoftReset::protocol

writing 1'b1 will apply a synchronous soft reset to the protocol module

front

uint8_t CSIRX_SoftReset::front

writing 1'b1 will apply a synchronous soft reset to the Front module